ProMagazine.com |

Ground Hog Chain-Type Trencher
Ground Hog’s T-4 operator-propelled chain-type trencher is designed to dig up to a 12” deep by 3” wide trench. For digging in all soil conditions, operators have a choice of carbide-tipped shark or bullet teeth. Conversions for depths up to 12” x 4” wide or 18” deep x 3” wide are also available. The T-4’s user-friendly, compact design fits through narrow gates and doorways, and easily trenches near walls, fences, etc. Its heavy-gauge steel construction, tapered roller bearings and double-row ball bearings ensure less maintenance.
groundhoginc.com
Indicate [41] on inquiry card or visit promagazine.com/einquiry

Storm Manufacturing Sterling ET Controller with Flow Control
The Storm Manufacturing Group Sterling ET with Flow Control irrigation controller reduces water use and is designed to utilize several communication management technologies. It accurately disburses the amount of water needed­—without over or under-watering. The controller uses data sources to monitor real-time weather conditions and adjusts its watering schedule appropriately. It can accommodate Water2Save and Weather Reach communications. With subscription or purchase, these two water management services regularly update the controller with weather data that can be accessed through the Internet or a cell phone. Sterling ET with Flow Control is suitable for commercial and residential use.
stormind.com
Indicate [42] on inquiry card or visit promagazine.com/einquiry

ITT Flowtronex Variable Frequency Drive Pumping Systems
The ITT Flowtronex residential and commercial series of Variable Frequency Drive Pumping (VFD) Systems are now available in 2-, 3- and 5-hp systems with a selection of three control configurations: Variable Drive Frequency, Pressure Start/Stop, and 24V AC Relay Start. The VFD Pumping System contains AISI 316L stainless-steel handling components along with a mounting bracket used for corrosion, resistance, appearance, strength and durability. An easy-access vent, prime and drain connections with stainless-steel plugs, and copper/bronze headers come with all models to ensure the ultimate in corrosion protection.
flowtronex.net
Indicate [43] on inquiry card or visit promagazine.com/einquiry

Jardinier SurfaceFlow Irrigation
New laws implementing water restrictions have prompted the adoption of a new approach to watering lawns. Jardinier SurfaceFlow technology is ideal for turf irrigation where runoff or overspray is an issue. The system takes advantage of the “wicking” action inherent in porous materials, and is based on the idea that a single point of watering at the surface of the soil spreads out across the connected porous material, distributing water evenly. Water usage can be reduced up to 50 percent, saving water and reducing runoff. Damage to buildings and signs—often caused by irrigation spray—is also avoided.
jardiniercorp.com
Indicate [44] on inquiry card or visit promagazine.com/einquiry

Rain Bird STPi Controller
Designed for contractor installation and homeowner use, the innovative Rain Bird STPi Controller takes simplicity to a whole new level. Fast and easy to install and operate, the STPi virtually eliminates callbacks, saving time and money. Simple-to-use “At-a-Glance” programming enables homeowners to quickly master this controller without even reading the instructions. With individual zone custom scheduling and advanced water-efficient features, it’s easy for consumers to maintain healthy plants. The STPi Controller is available in 4-, 6- and 9-zone indoor models.
rainbird.com
Indicate [45] on inquiry card or visit promagazine.com/einquiry

Vermeer Lawn Plow Attachment
Vermeer’s multiblade lawn plow attachment is designed specifically to install Netafim dripperline in commercial and residential irrigation projects. The multi-blade plow attachment fits the Vermeer LM42 lawn plow and RT450 tractor, and uses a high-frequency vibration to cut through the ground and close up the channel around the dripperline. It is capable of laying three rows of tubing at a time, with depth adjustability from 2 to 12 inches in 1-inch increments and spacing width adjustability from 10 to 24 inches in 2-inch increments.
vermeermfg.com
Indicate [46] on inquiry card or visit promagazine.com/einquiry

Toro 3/4-Inch Gear-Driven T5 Rotor
Designed for maximum irrigation efficiency, the new 3/4-inch gear-driven Toro T5 rotor pops up a full 5 inches to water in a 25- to 50-foot radius in part- and full-circle operation, from 40 to 360 degrees. The nozzle design delivers the right amount of water from the beginning to the end of the arc, maintaining a consistent precipitation rate. The profile of the new Toro T5 rotor is designed to fit into a 4-inch rotor footprint, allowing contractors to easily update existing systems. The Toro T5 rotor comes with a wide selection of nozzles to handle a wide range of applications.
toro.com
Indicate [47] on inquiry card or visit promagazine.com/einquiry